At the CGPM , they decided the last leap second we'll ever see for UTC, or Coordinated Universal Time, happened back at the end of 2016 .
Visit jeffgeerling.com → RSS feedOn Hacker News Mar 2016 – Jul 2026
Hardware & Electronics 97Systems & Performance 38Tech Industry & Business 26Life, Learning & Writing 19Networking & Internet 17Infrastructure & DevOps 16
For years, the best way to get 10 gigabit networking on laptops was to buy an expensive, large, and hot 10 GbE Thunderbolt adapter. With new RTL8159-based 10G USB 3.2 adapters coming onto the market, the bulky adapters might be a thing of the past. Just look at the size of the thing in comparison to my Thunderbolt…
I am frequently away from home (whether on family vacation, a business trip, or out around town), but I have a number of important resources on my home network—as any homelabber does. There are services I like to access remotely like my NAS with my giant media library, my edit server with all my active projects, and…
SpaceX's Starlink internet service uses satellites in low-earth orbit to provide high-speed Internet to underserved parts of the world, especially places without easy access to cable or fiber. SpaceX's Starlink beta opened up in my area, so I installed Dishy—that's the nickname for the large white satellite dish…
I came to the NAB (National Association of Broadcasters) show this year with my Dad to learn more about time in broadcast and live production. I was expecting to learn more about grandmaster clocks, AV sync, timing in protocols like Dante, Livewire, AES67, and more—and I have. But then on the first day here I found…
In March, I got an email from SpaceX saying Starlink was available at my address, and I could pre-order. I paid $500 for the equipment, plus $25 for a Volcano Roof Mount, and $99 for the first month of service, and a few weeks later, I got the kit you see in the image above. I was a little too excited about getting…
If you were 5 microseconds late today, blame it on NIST. Their facility in Boulder Colorado just had its power cut for multiple days. After a backup generator failed, their main ensemble clock lost track of UTC, or Universal Time Coordinated. But even if you used the NTP timing servers they run, they were never off by…
I've been following WisdPi's development of various 5 Gbps and 10 Gbps Ethernet adapters for the past couple years. They use newer Realtek Ethernet chips, which sometimes have performance quirks—most frequently encountered under Linux. In today's video, I tested the new WisdPi 10G Ethernet Expansion Card for Framework…
January 1, 2021 Update: My 1.34 Gbps benchmark was flawed. See this GitHub issue and this updated blog post to learn more: WiFi 6 is not faster than Ethernet on the Raspberry Pi. After buying three wireless cards, a new WiFi router, optimizing my process for cross-compiling the Linux kernel for the Raspberry Pi…
I've been using the built-in 10 Gigabit Ethernet on my Mac Studio for a few years. It works fine: I can edit 4K video straight off my NAS over the network, and run backups at around 1 GB/sec. But... I want more. I upgraded my rack and my NAS to 25 GbE a couple years ago, and wanted to upgrade my main workstation, too.
tl;dr: I successfully got the Intel I340-T4 4x Gigabit NIC working on the Raspberry Pi Compute Module 4, and combining all the interfaces (including the internal Pi interface), I could get up to 3.06 Gbps maximum sustained throughput. Update: I was able to boost things a bit to get 4.15 Gbps! Check out my video here…
Today's video is about Starlink—I've had an active subscription since last February, and as it's been a year, I figured I should post an update. The tl;dr: when I had a new roof put on late last summer, I took down 'Dishy McFlatface', but I haven't put the dish back up. I have been holding out hope I could transfer my…
Last year my aunt let me add her original Tangerine iBook G3 clamshell to my collection of old Macs1. It came with an AirPort card—a $99 add-on Apple made that ushered in the Wi-Fi era. The iBook G3 was the first consumer laptop with built-in Wi-Fi antennas, and by far the cheapest way to get a computer onto an 802.11…
In October, my Dad and I got to go behind the scenes at two St. Louis Blues (NHL hockey) games, and observe the massive team effort involved in putting together a modern digital sports broadcast. I wanted to explore the timing and digital side of a modern SMPTE 2110 mobile unit, and my Dad has been involved in studio…
At NAB, I found a demo of Wi-Wi STAMP, a wireless time synchronization protocol that came out of Japan's NICT. Wi-Wi stands for Wireless 2Way interferometry, and it uses the 900 MHz band for picosecond-level time sync, and mm-level distance accuracy, in a tiny box, currently the size of a smartphone. The system is…
I needed a very basic 'Internet sharing' router setup with one of my Raspberry Pis, and I thought I'd document the setup process here in case I need to do it again. I should note that for more complex use cases, or where you really need to worry about security and performance, you should use something like OpenWRT…
Since the Raspberry Pi Compute Module 4 was introduced last year, I've been testing a variety of PCI Express NICs with it. One of the main types of NIC I'm interested in is cheap 2.5 Gigabit Ethernet adapters. 2.5 Gigabits is about the highest reasonable bandwidth you can get through the PCI Express Gen 2.0 x1 lane on…
tl;dr: I set up an open source Time Pi project to build a stratum 1 PTP and NTP timeserver using a Raspberry Pi. Time is important to modern society, and most of us have a clock on our wrist that's more accurate than at any time in human history. But highly precise time is important in many industries, especially…