I went kind of overboard looking into issues with Altera USB Blaster clones a couple of years ago . While writing that post, I ran into some really frustrating intermittent problems in Linux with jtagd that I was never able to figure out:
Visit downtowndougbrown.com → RSS feedOn Hacker News Apr 2019 – Jun 2025
Hardware & Electronics 17Systems & Performance 7History & Retro Computing 7Tools & Productivity 2Security & Privacy 2Open Source 2
A while ago, I put 16 GB of RAM into one of my computers. The computer is using a Foxconn P55MX motherboard with a Core i5 750. It’s old and could probably be replaced, but it still works for what I need.
Update on 2023/05/19: ASUS has publicly acknowledged the issue and provided an explanation and workaround of their own (rebooting, or a hard reset if the reboot doesn’t fix it). The original post is below:
If you’re new to this series, I’ve been documenting the process I went through upgrading my old PXA166-based Chumby 8’s 2.6.28 Linux kernel to a modern 6.x version. Here are links to parts 1 , 2 , 3 , 4 , 5 , 6 , 7 , and 8 . At this point in the project, all of the main hardware peripherals were working great. I…
There have been some past rumblings on the internet about a capacitor being installed backwards in Apple’s Macintosh LC III . The LC III was a “pizza box” Mac model produced from early 1993 to early 1994, mainly targeted at the education market. It also manifested as various consumer Performa models: the 450, 460…
This post has a little bit of everything. Hardware diagnostics, some suspiciously similar datasheets from two separate Taiwan chip manufacturers, and firmware reverse engineering. Read on if that sounds like fun!
I was recently poking around inside the original Power Macintosh G3’s ROM and accidentally discovered an easter egg that nobody has documented until now.
In my last post about hard drives that go bad over time , I hinted at having rescued a lost piece of obscure Apple software history from an old 160 MB Conner hard drive that had its head stuck in the parked position. This post is going to be all about it. It’s the tale of a tad bit of an obsession, what felt like a…
This is the story of how Apple made a mistake in the ROM of the Macintosh Classic II that probably should have prevented it from booting, but instead, miraculously, its Motorola MC68030 CPU accidentally prevented a crash and saved the day by executing an undefined instruction.
I recently found myself needing to change the monitor that a cheap HDMI “dummy plug” pretended to be. It was a random one I had bought on Amazon several years ago that acted as a 4K monitor, and I needed it to be something simpler that didn’t support a 4K resolution. The story behind why is a long one that I’m still…
As part of my work toward an upcoming post about a lost piece of very obscure Mac history that has finally been found, I’ve been playing around with old Apple-branded SCSI hard drives made by Quantum and Conner in the 1990s. What I’m about to describe is already common knowledge in the vintage computing world, but I…
After I wrote about the possibility of programmable Mac ROM SIMMs in Quadras a couple of months ago, I suspected that there had been a way for developers at Apple in the 68k Mac era to reflash the ROM in their Macs during development, just like BIOS updates on PCs. The reason I believed this is because the ROM SIMM…
In my last post , I figured out how to use Apple’s leaked Flasher utility from the 1990s to reflash a ROM SIMM inside of my Performa 630. It’s basically the Mac equivalent of a BIOS update, but only for Apple’s developers. The research involved in that post was quite a journey of reverse engineering from both a…
What follows is the story of how I fixed not one, but two, different flawed Altera USB Blaster clone devices that never worked correctly after I bought them.
As I mentioned in my last post, I spent a good chunk of my spare time over the past 6 months working on a project I’ve been thinking about for over a decade. I bought a Chumby 8 in 2011. It’s an 8″ touchscreen device powered by the Marvell PXA166 processor. It is essentially a souped-up digital picture frame with…
A couple of months ago I stumbled upon a post on Hackaday about an inexpensive open-source USB 2.0 sniffer created by Alex Taradov . This is a really cool project! Normally, USB sniffers like this can cost thousands of dollars, especially if you’re paying for fancy protocol decoding and also want high-speed 480 Mbps…
I’m going to start this post off with the obligatory list of links to the previous parts in the series if you’re new here and are interested in seeing the full story: 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , and 9 . This is the tale of how I upgraded my Chumby 8 to run a modern Linux kernel.
This post is going to be a bit different from my usual posts. It’s still about computers, but it’s about a different type of computer: the computer modules in my 2009 Dodge Ram 1500 pickup. Vehicles these days have lots of computers in them. I’ve historically been afraid to mess too much with them in fear of screwing…
I was looking at one of my classic Macs a few weeks ago, and noticed that my Ubuntu 18.04 netatalk server wasn’t showing up in the Chooser anymore. If you’re not familiar with netatalk , it’s an implementation of Apple Filing Protocol (AFP) that runs on Unix-like operating systems such as Linux and NetBSD. It allows…
I wanted to share a story of a segmentation fault I helped track down this weekend. I thought the final root cause of the segfault was interesting because of how unrelated it was to the code I was trying to debug.
A couple of weeks ago I found a really good deal on a Socket AM4 motherboard that supports the newest AMD Ryzen CPUs. The motherboard is an ASRock A520M/ac . It’s a very basic motherboard which doesn’t appear to be sold by any of the usual retailers anymore, but I couldn’t pass up on the deal, especially with the…